Product Description
Product FAQ
Product Alternatives
![USE 500116-55MM OR 500116-44MM Image for USE 500116-55MM OR 500116-44MM](/userfiles/images/products/130x130/no-image.png)
![Pedal extension 44mm TD TF Image for Pedal extension 44mm TD TF](/userfiles/images/products/130x130/500116-44mm.jpg)
Technical Details
weight | 0.157 |
---|
Clutch and Flywheel
Important change points to note during the TD/TF production run:
The TD began production with a 7.25" clutch assembly. The starter motor was the smaller Lucas unit requiring a ring gear with 120 teeth but the bare flywheel was identical to that used on the TC. From engine no XPAG TD9408 the larger 8" clutch assembly was fitted requiring a change in flywheel and ring gear although this still had 120 teeth. At the same time the clutch housing was changed to allow fitting of a larger 3/4" diameter cross shaft and associated levers to cope with the increased stresses imposed by the stronger clutch. The TD up to chassis TD22250 was fitted with a clutch operating cable but from TD22251 this was changed for the stronger rod which continued through the TF production run. This required the fitting of a clutch pedal stop inside the pedal box. If you have trouble with the clutch cable on an early car you could make an improvement by fitting the later rod.
Clutch and Flywheel
Basket
You have 0 Items - £0.00
View Basket